|
|
|
|
AT300/4 |
AT300/5 |
|
 |
 |
|
 |
|
|
Technical data |
|
Turning |
Drilling-milling |
|
Distance between centers |
470 mm |
Max. drilling capacity |
15 mm |
|
Swing over bed |
300 mm |
Spindle- table distance (head vertical
stroke) |
240 - 320 mm |
|
Swing over carriage |
140 mm |
Distance from spindle axis to column |
175 mm |
|
Spindle taper |
MT 4 |
Head swivel angle |
360° |
|
Spindle bore |
26 mm |
Range of spindle speed |
125 - 1000 r/min / 12 steps |
|
Range of spindle speed |
160 - 1600 r/min / 6 steps |
Spindle stroke |
80 mm |
|
Longitudinal feed rates |
0,075 - 0,15 mm/r |
Spindle taper |
MT 3 |
|
Metric threads |
0,5 - 3,0 1/mm / 14 kinds |
Worktable size |
150 x 425 mm |
|
Whitworth threads |
11 -40 T.P.I. / 20 kinds |
T-slot size |
12 mm |
|
Tailstock barrel taper |
MT 3 |
|
|
|
Tailstock barrel stroke |
50 mm |
|
|
|
Motor |
550 W / 230 V |
|
Dimensions |
1060 x 540 x 750 mm |
|
Weight |
180 / 190 kg |
|
| |
|
Standard accessories |
Optional accessories |
|
3-jaws chuck |
4-jaws chuck |
|
Compound rest + tool post |
Face plate |
|
Dead centers |
Steady rest |
|
Change gears |
Follow rest |
|
Drill chuck with arbor |
Machine base |
|
Tool kit |
|
|
|
|
|
Motor drive is switched between lathe
and milling head by clutch. Thread cutting dial is
only on the AT300/5 machine. Basic difference
between the two machines is the position of the
longitudinal feed wheel. |
| |
|
